This custom 2021 Ford Bronco was done by a high-end custom shop and has many upgrades. This Bronco started as a 2021 base model but now has many features of the Big Bend, Black Diamond and Outer Banks trim levels. It is powered by a 2.3-liter engine with a 10-speed automatic transmission. The body panels were customized and changed to 2-inch-wider versions that allow full travel of the tires. The hood was replaced with a heat-extracting hood. The Bronco was completely repainted in a custom Porsche Nardo Matte Gray color, with a matte clear coat - a correct, proper respray, including door jambs and roof bars. The suspension consists of 2.5-inch coilovers on all four corners, providing about 1.5 inches of lift over the stock Sasquatch height, providing a better on- and off-road ride. The front and rear suspensions were further upgraded with fabricated tubular control arms with upgraded joints, providing more travel and eliminating improper joint angles that can occur when lifting without aftermarket control arms. The ARB Zenith bumpers have been custom-fabricated to fit the Bronco body panels and were shortened about 7 inches in the front and reshaped for a finished look. The rear was shortened and radiused to match the rear fender opening. The bumpers were then powder-coated. They feature integrated jack points, recovery hooks and an LED light bar connected to overhead console. The tires are 35 inches currently but can run 37 inches if desired. The interior has been upgraded with a custom leather interior kit in a gray that perfectly matches factory materials. The Bronco also has the Ford full floor rubber liners. Go Rhino RB10 side steps were added to make entry and exit a bit easier. A Draw Tite Class 3 frame hitch was added and set up to work with the ARB rear bumper. This vehicle still has its full warranty. CARFAX shows Ford Motor Company manufacturer safety recalls issued on 06/13/2022: rear door child safety lock inspection; 12/12/2022: accessory protocol interface module software update.